Chapter 20 Voice; Sip Global Parameters; Sip Service Provider - ZyXEL Communications PMG5318-B20B User Manual

20.1 SIP Global Parameters

The GPON Device uses a SIP (Session Initiation Protocol) account for VoIP (Voice over Internet
Protocol) calls. Click Voice > SIP Basic Setting to open the Global Parameters screen.
Figure 81 SIP Global Parameters
Table 73 SIP Global Parameters
LABEL
Bound Interface
Name
IP Address Family
Apply

20.2 SIP Service Provider

Click Voice > SIP Basic Setting > Service Provider to open the following screen. Use this
screen to configure each SIP account's basic settings. Your VoIP service provider (the company that
lets you make phone calls over the Internet) should provide this.
C
DESCRIPTION
Select a specific WAN interface to use for SIP traffic or select Any_WAN to let the
GPON Device use any of its WAN interfaces for SIP traffic.
Select the network protocol to use for SIP traffic. The GPON Device supports IPv4 at
the time of writing.
Click this to save your changes and to apply them to the GPON Device.
PMG5318-B20B User's Guide
100
HAPTER
2 0
Voice