Bearing Carrier Installation - Polaris 2012 RANGER RZR 570 INTL Service Manual

Bearing Carrier Installation

1. Install d rive sha ft a xle thr ough the ba ckside of the
bearing carrier. Be sure bushings and pivot tubes are
installed.
2. Install the fasteners that attach the rear bearing carrier
to the upper and lower A-arms. Torque NEW nuts to
specification.
Upper and Lower Rear Bearing Carrier Nuts:
40 ft. lbs. (54 Nm)
3. Apply grease to drive shaft axle splines.
= T
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
4. Install rear wheel hub assembly, cone washers, and
hand t ighten th e castle n ut. Install w ashers wit h
domed side out.
Cone Washers
Wheel
Hub
5. Install new brake caliper mounting bolts and torque to
44 ft. lbs. (60 Nm).
Rear Caliper Mounting Bolts:
44 ft. lbs. (60 Nm)
CAUTION
New bolts have a pre-applied locking agent
which is destroyed upon removal. Always use
new brake caliper mounting bolts
upon assembly.
FINAL DRIVE
Out
44 ft. lbs.
60 (Nm)
= T
7.29
7