Gearcase Removal - Polaris 2012 RANGER RZR 570 INTL Service Manual

7. Inspect the roll cage assembly for cracks or excessive
wear. If damaged, replace the roll cage assembly.
Roll Cage Assembly

Gearcase Removal

1. Stop engine and place gear selector in Park.
2. Refer to "FRONT DRIVE SHAFT - Driv
Removal" and remove both front drive shafts from the
front gearcase.
3. Remove the propshaft from the front gearcase. (see
"PROPSHAFT SERVICE").
4. Disconnect the wire harness above the front gearcase
and remove the harness from the retaining dart.
5. Remove the vent line from the front gearcase.
6. Remove the (4) bolts securing the front gearcase to
Rollers
7. Remove the ge arcase from the front LH wheel well
e Shaft
AWD Harness
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
frame.
Disconnect
Harness
Remove
4 Bolts
area and slide it between the upper and lower A-arm.
FINAL DRIVE
Remove
Vent Line
Gearcase image is
for reference only.
7
7.19