Cab Frame; Assembly / Removal - Polaris 2012 RANGER RZR 570 INTL Service Manual

CAB FRAME

Assembly / Removal

NOTE: Finger tight en all co mponents until cab
frame is c ompletely ass embled on veh icle, t hen
tighten to specifications listed.
1. Assemble the rear cab frame and the front cab frame
at the coupler joints and secure with four (3/8-16 x 1
1/4) screws and (3/8-16 Nyloc) nuts. Tighten screws
to 25-28 ft. lbs. (34-38 Nm).
2. Place the assembled cab frame onto the vehicle and
align the rear mount holes. Fasten the rear cab frame
brackets to vehicle with four (5/16-18) bolts and (5/16-
18) nuts. Tighten bolts to 16-18 ft. lb s. (22-24 Nm).
BODY / STEERING / SUSPENSION
3. Place the stra ps fro m the sa fety ne t over th e fro nt
4. Fasten the front of the cab frame to the base brackets
5. Attach side bars to cab frame using M6 screws and
6. To r emove the ca b fra me, r everse th e a ssembly
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
Fasten the two se lf-tapping screws to the rear inner
portion of the bracket on each side. Tighten screws to
15 ft. lbs. (20 Nm).
coupler posts.
and secure with four (3/8-16 x 1 1/4) screws and (3/
8-16 Nyloc) nuts. Tighten screws to 25-28 ft. lbs. (34-
38 Nm).
nuts on top and M8 screws and nuts on the bottom.
Tighten to 8-10 ft. lbs. (10.8-13.5 Nm).
procedure (steps 1-5).
5
5.3