Polaris 2012 RANGER RZR 570 INTL Service Manual page 253

5. Install the upper pinch bolt and torque to specification.
23 ft. lbs.
(31 Nm)
Ball Joint Pinch Bolts:
23 ft. lbs. (31 Nm)
6. Apply grease to drive shaft axle splines.
7. Install front wheel hub assembly, cone washers, and
hand tighten th e ca stle nut. Insta ll washers with
domed side out.
Cone Washers
Wheel
Hub
= T
Out
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
8. Torque wh eel h ub n ut to spe cification and install a
new cotter p in. Tigh ten n ut slightly if ne cessary to
align cotter pin holes.
80 ft. lbs.
(108 Nm)
Wheel Hub Castle Nut:
80 ft. lbs. (108 Nm)
9. Install b rake calipe r m ounting b olts and tor que to
specification.
Front Caliper Mounting Bolts:
31-34 ft. lbs. (42-46 Nm)
CAUTION
New bolts have a pre-applied locking agent
which is destroyed upon removal. Always use
new brake caliper mounting bolts
upon assembly.
10. Install wheel and (4) wheel nuts. Torque wheel nuts
to specification.
Wheel Nuts:
Steel Wheels: 27 ft. lbs. (37 Nm)
Aluminum Wheels: 30 ft. lbs. + 90° (1/4 turn)
11. Rotate wheel and check for smooth operation. Bend
both en ds of cotte r pin around end of sp indle in
different directions.
FINAL DRIVE
NEW Cotter Pin
= T
= T
= T
7.11
7