KTM 2011 690 SMC EU Repair Manual page 105

16 ENGINE
Main work
–
Position the engine in the frame.
–
Mount swingarm pivot
–
Mount the screw of the swingarm pivot but do not tighten yet.
300225-11
–
Install the screw and nut
yet.
300223-11
–
Remove the floor jack with the special tool.
Floor jack attachment (75029055000) (
300222-10
–
Position the engine bearer.
–
Mount and tighten screws
Guideline
Screw, engine bearer on frame
–
Mount and tighten screw
Guideline
Engine carrying screw
300221-11
–
Tighten the swingarm pivot.
Guideline
Screw, swingarm pivot
–
Tighten the lower engine bracket.
Guideline
Engine carrying screw
–
Position the hoses of the engine breather, the SLS and the oil return line. Mount
the spring band clamp
Pliers for spring band clamp (60029057100) (
300220-11
.
1
of the lower engine bracket, but do not tighten them
2
p. 217)
.
3
M10
with nut.
4
M10 45 Nm
(33.2 lbf ft)
M12
M10 45 Nm
(33.2 lbf ft)
using the special tool.
5
45 Nm
(33.2 lbf ft)
Loctite ® 243™
80 Nm (59 lbf ft)
Loctite ® 243™
p. 212)
103