Table of Contents
Advertisement
16
ENGINE
16.5.9
Installing primary gear
16.5.10 Installing clutch cage
–
Push on the starter idler gear
–
Push on the needle bearing and torque limiter
300064-11
–
Ensure that the spring washer is seated properly.
–
Mount primary gear
Info
Turn freewheel gear backwards and forwards to ease meshing.
300063-10
–
Install supporting plate
300057-10
–
Install the clutch cage
Info
Turn the clutch basket and oil pump gear wheels backwards and forwards
slightly to help them mesh more easily.
–
Mount the half washers with the sharp edge facing outward.
Info
Grease the half washers to ease assembly.
300058-10
–
Position stepped washer with the recesses toward the half washers.
–
Insert the clutch package
Info
If necessary, turn the main shaft a little to ease access.
Make sure that the upper clutch facing disc is offset by one notch.
302123-10
with washer. Mount lock ring.
4
5
.
1
and needle bearing
1
2
.
3
in the clutch cage.
4
with washer. Mount lock ring.
.
147
Advertisement
Table of Contents
