Removing Rocker Arm; Changing Camshaft Bearing - KTM 2011 690 SMC EU Repair Manual

16 ENGINE

16.4.20 Removing rocker arm

16.4.21 Changing camshaft bearing

–
Remove screws
300113-10
–
Screw a suitable screw
shafts.
–
Take off the rocker arm
300114-10
Preparatory work
–
Remove the rocker arm. (
Main work
–
Clamp the cylinder head.
Clamping plate (75029050000) (
–
Remove the large camshaft bearing using the special tool
Push-out drift (75029051000) (
300226-10
–
Remove the small camshaft bearing using special tool
Insert for bearing puller (15112018100) (
Bearing puller (15112017000) (
300228-10
–
Press in the small camshaft bearing as far as possible using the special tool
Push-in drift (75029044020) (
300229-10
.
1
into the rocker arm shafts
3
.
4
p. 129)
p. 216)
p. 216)
p. 210)
p. 215)
. Pull out the rocker arm
2
.
1
.
2
p. 210)
129
.
3