Controls; Emri Fap-2000 - Furuno FMD-3200 Operator's Manual

26. AUTOPILOT OPERATIONS
26.2

Controls

This section provides a brief description of the autopilot controls used with the ECDIS.
For detailed information, see the autopilot's operator's manual.
26.2.1

EMRI FAP-2000

Control Panel
10
11
4
5
6
No.
1 PROGRAM TRACK: Program Track-controlled heading change using set radius. Also for
steering with selected TT models.
2 GOTO TRACK: Track-controlled route steering.
3 GOTO WAYPOINT: Course-controlled route steering.
4 PROGRAM HEADING CHANGE: Program heading-controlled course change using set radi-
us.
5 RADIUS CONTROL: Immediate radius-controlled course change using set radius.
6 HEADING CONTROL: Immediate heading-controlled course change using set rudder angle
limit.
7 Loading condition indicator - Light, Medium or Loaded.
8 Performance indicator - Economy, Medium or Precise.
26-2
12
ALARM
RESET
MANUAL
SPEED
OFF COURSE
FUNC.
SETUP
RUD.LIMIT DEG.
PROGRAM
AUTO LIMIT
HEADING
CHANGE
RADIUS
CONTROL
PORT
START
HEADING
HEADING
CONTROL
CHANGE
FAP-2000 AUTOPILOT
17
13
FURUNO
GYRO
ON LIMIT
SET HEADING
SPEED KNOTS
RAD. ROT.
N.M. ° /MIN
SPEED WARN
INCREASE
15
16
14
STBD
ACKN.
WARNING
DECREASE
18
Description
LIGHT
7
MEDIUM
LOADED
ECONOMY
8
MEDIUM
PRECISE
ROUTE
TRACK
9
TURN
HEADING
READY
GO O T
3
WAYPO NT I
2
GO TO
TRACK
PROGRAM
1
ACK
TR