How To Use The Alert Parameters Page - Furuno FMD-3200 Operator's Manual

9. ROUTES
9.4.4

How to use the Alert Parameters page

The [Alert Parameters] page sets the alert conditions to use when checking a route.
Put a "W" for an item to highlight on the chart. ([Safety Contour] is fixed to "A" (Alarm).
If you do not require the highlight display for an item, put a "C" for that object. The rel-
evant alerts (Alarm, Warning, Caution) are shown in the [Check Results] page.
You can select the safety contour and chart alerts used to check the safety of the
route. This allows you to check the safety with conditions different from those chosen
for system use. This is useful when making a route for different loading or sailing con-
ditions.
Radio buttons, input boxes
Item
Check type Check how to apply the alerts,
to every leg or individual leg.
(Only [Draught] can be applied
to every leg.)
Safety Set the safety contour (in me-
Contour ters).
UKC Limit Under keel clearance limit.
Date (UTC) A chart may have date-depen-
dent features. Enter the actual
data of embarkation to know
date-dependent features.
[Copy from Copy the default alert settings
Default to this route.
Alert] button
[Copy to Copy the alert settings for this
Default route as default alert settings.
Alert] button
[Check Click to check route for safe
Route] navigation. The results appear
button on the [Check Results] page.
Leg Leg number
9-8
Click each box to show one of the following:
- W (Warning): Item highlighted in red on chart
- C (Caution): No highlight
Route Bank
Description
W W
Alert items
Item
Draught/m Ship's draught
Safety Contour Safety contour
Areas to be Areas to be avoided
Avoided
User Chart User chart danger area
Danger
Traffic Traffic separation zone
Separation
Zone
Inshore Traffic Inshore traffic zone
Zone
Restricted Area Restricted area
Caution Area Caution area
Offshore Produc- Offshore production area
tion Area
Military Practice Military practice area
Area
W W
Description