Furuno FMD-3200 Operator's Manual page 4

SAFETY INSTRUCTIONS
The operator must read the safety instructions before attempting to operate the equipment.
WARNING
CAUTION
Warning, Caution
WARNING
Do not open the equipment.
This equipment uses high voltage that
can cause electrical shock.
Only qualified persons can work inside
the equipment.
Turn off power at switchboard if the
something is dropped inside the
equipment.
Fire or electrical shock can result if the
power remains on.
Turn off power at switchboard if the
equipment is emitting smoke or fire.
Fire or electrical shock can result if the
power remains on.
Do not place liquid filled containers
on the top of the equipment.
Fire or electrical shock can result if a
liquid spills into the equipment.
Use the correct fuse.
Use of a wrong fuse can cause fire
or damage the equipment.
ii
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in minor or moderate injury.
Prohibitive Action
Warning Label
Warning labels are attached to the Processor
Unit. Do not remove any label. If a label is
missing or damaged, contact a FURUNO
agent or dealer about replacement.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
WARNING
To avoid electrical shock,
do not remove cover.
No user-serviceable parts
inside.
Mandatory Action
WARNING
Do not dissassemble or modify the
equipment.
Fire, electrical shock or bodily injury can
result.
Do not operate the equipment with
wet hands.
Fire or electrical shock can result.
Keep the equipment away from areas
where contact with water is likely.
Fire or electrical shock can result if
water gets into the equipment.
Name: Warning Label (1)
Type: 86-003-1011-3
Code No.: 100-236-233-10
Name: Warning Label (2)
Type: 03-129-1001-3
Code No.: 100-236-743-10