1How To Export Screenshots; 2How To Delete Screenshots; 3How To Print Screenshots - Furuno FMD-3200 Operator's Manual

23. SETTINGS MENU
23.10.1 How to export screenshots
You can export screenshots to a USB flash memory as follows:
1. Insert a USB flash memory in the USB port on the Control Unit.
2. Open the [Screenshot] page.
3. Put a checkmark in the checkbox of the screenshot(s) to export.
4. Click the [Export] button.
SAVE FILE
5. Select the USB flash memory.
6. Click the [OK] button to export the screenshots selected.
7. If the exporting was successful, a window showing the number of files exported
appears. Click the [OK] button to finish.
23.10.2 How to delete screenshots
1. Select the [Screenshot] page.
2. Put a checkmark in the checkbox of the screenshot(s) to delete. To select all
screenshots, right-click the box to the left of the [Date] column then select [Select
all]. To clear all check marks, select [Clear all].
3. Click the [Delete] button. You are asked "Selected files will be deleted. Do you
wish to continue?"
4. Click the [Yes] button to delete the screenshots selected. The message "File de-
letion succeeded." appears.
5. Click the [OK] button to finish.
23.10.3 How to print screenshots
With connection of a printer you can print the screenshots stored in the SSD of the
processor unit.
1. Select the [Screenshot] page.
2. Put a checkmark in the checkbox of the screenshot(s) to print.
3. Click the [Print] button.
4. Click the [OK] button to finish.
23-12