Appendix 3 Digital Interface - Furuno FMD-3200 Operator's Manual

APPENDIX 3 DIGITAL INTERFACE

Digital Interface
Input sentences:
ABK, ACN, ALC, ALF, ALR, ARC, CUR, DBT, DPT, DTM, ETL, GGA, GLL, GNS, HBT, HDT, HTD,
MTW, MWV, NRX, OSD, PRC, RMC, ROR, ROT, RPM, RSA, RSD, THS, TRC, TRD, TTM,
VBW,VDM, VDO, VDR,VSD, VHW, VTG, XDR, ZDA
Output sentences:
ABM, ACK, ACN, ALC, ALF, ARC, BBM, DDC, EVE, HBT, HTC, OSD, VBW, VDR, VSD, XTE
Data reception
Data is received in serial asynchronous form in accordance with the standard referenced in
IEC 61162-2.
The following parameters are used:
Baud rate: 38,400 bps (HDT, THS, !AIVDM, !AIVDO, !AIABK, $AIALR). The baud rate of all other
sentences is 4800 bps
Data bits: 8 (D7 = 0), Parity: none, Stop bits: 1
D0
Start
bit
D1 D2 D3 D4
Data bits
D5 D6 D7
Stop
bit
AP-17