How An Alert Is Transferred To The Bnwas - Furuno FMD-3200 Operator's Manual

25.7

How an Alert is Transferred to the BNWAS

Alerts are transferred to the BNWAS in the following sequence.
Note: For a DNV class vessel, only category A alerts are transferred.
1) An alert generated by an equipment connected to the AMS is transferred to the
BNWAS if it is not acknowledged within 30 seconds.
2) The BNWAS sends the Emergency Call to applicable Cabin Panels in living quar-
ters and general quarters, to inform personnel of an unacknowledged alert.
To stop both the Emergency Call and the transfer of the alert, do as follows:
• Category A alert: Acknowledge the alert at the equipment that generated the alert.
• Category B alert: Acknowledge the alert at the equipment that generated the alert
or the AMS.
Connected
equipment
Note: The transfer of alarms can be stopped (when in port, etc.) by setting the system
in standby. See section 1.4 for details.
Alert generated.
Emergency Call sent to Cabin Panels.
Cabin Cabin
Panel Panel
25. ALERT MANAGEMENT SYSTEM (option)
AMS
Alert is transferred if not
acknowledged within 30
seconds.
BNWAS
Cabin Cabin
Panel Panel
Cabin
Panel
25-5