Furuno FMD-3200 Operator's Manual page 359

26. AUTOPILOT OPERATIONS
1. Select [GoSea] or [GoAW] with the TCS button on the InstantAccess bar of the
ECDIS.
2. Set the Switch Unit position switch on the Switch Unit to NAVI to start TCS.
Non-follow-up steering mode (System setting: NFU)
The operator sets the steering mode selector to NFU with the System Selector switch
and steers with the Non-Follow-Up steering lever. While in the NFU steering mode the
ECDIS system displays both the rudder angle and the steering mode.
Remote hand steering mode (System setting: RC)
Set the Switch Unit position switch on the Switch Unit to the RC position to get into the
RC mode. The steering mode indicator "RC" flashes. The remote hand steering is in
use while "RC" flashes. (This operation is like the HAND mode.)
26-15