12. NAVIGATION TOOLS
12.8
Divider
The divider performs the following calculations:
• Range and bearing between two points
• Total TTG from start to end
The divider is available in the Voyage navigation and Voyage planning modes. Only
one divider can be displayed. The divider is neither saved nor shared among
FMD-3000, FAR-3xx0, FCR-2xx9.
12.8.1
How to use the divider
Do as shown below to use the divider.
Select New
Divider
00:00
00:00
Starting point
Distance and bearing
between points
How to delete points
Point(s) can be deleted. Put the cursor on a point, right click, then select [Delete Points] from
the pop-up menu. The point(s) deleted depends on the point selected.
End point
Delete end point
You can also drag from an intermediate point to make another point.
12-10
Right click
starting point
Ship off center
Object INFO
Chart Legend
Manual Update
New Divider
00:32
00:32
5.9NM
5.0NM
051.2°
- TTG to point
- Total TTG
- Total distance
• TTG between two points
• Total distance from start to end
Drag circle to
next point
2.6NM
055.1°
00.00
00.00
Intermediate point
Delete intermediate point
Divider appears.
00.00
00.00
Connecting
points are
deleted.