Furuno FMD-3200 Operator's Manual page 427

No. Text
327 EC-3000 Ch.08
COM Timeout
330 Double Gyro Sta-
tus Conflict
331 Select Gyro Status
Missing
360 Wind Sensor 1
COM Error
361 Wind Sensor 2
COM Error
362 Wind Sensor 3
COM Error
370 Water Current
COM Error
Default Meaning
Caution Input from EC-3000 serial
ch.8 has been discontinued
for more than certain time.
(Set at installation)
Default: No timeout
Warning When connected with Dou-
ble Gyro System, instru-
ment produced by
Yokogawa Electric, two
gyro has been displayed
"Selected" status for 3 sec-
onds.
Warning When connected with Dou-
ble Gyro System, instru-
ment produced by
Yokogawa Electric, "Double
Gyro" status cannot be ac-
quired.
Caution Data from No.1 wind sensor
has been discontinued for
more than set time.
(Set at installation)
Default: 60 seconds
No.1 wind sensor is turned
off, or there is a problem
with network.
Caution Data from No.2 wind sensor
has been discontinued for
more than set time.
(Set at installation)
Default: 60 seconds
No.2 wind sensor is turned
off, or there is a problem
with network.
Caution Data from No.3 wind sensor
has been discontinued for
more than set time.
(Set at installation)
Default: 60 seconds
No.3 wind sensor is turned
off, or there is a problem
with network.
Caution Data from water current has
been discontinued for more
than set time.
(Set at installation)
Default: 60 seconds
Water current sensor is
turned off, or there is a prob-
lem with network. Check the
connection with water cur-
rent and network.
APPENDIX 5 ALERT LIST
Remedy
Check the connection of
Ch.8.
If the error frequently
occurs, contact FURUNO
and inform frequency of
occurrence.
If the error frequently
occurs, contact FURUNO
and inform frequency of
occurrence.
Check the connection with
No.1 wind sensor.
Check the connection with
No.2 wind sensor.
Check the connection with
No.3 wind sensor.
Check the connection with
water current and network.
AP-49