Controls; How To Adjust The Brilliance Of The Lcd And Keys - Furuno VR-7000 Operator's Manual

1.3.2

Controls

Control
BRILL
BRILL
ACK
ACK
TEST
TEST
Extract
Extract
MENU/ESC
MENU
ESC
ENT
ENT
1.3.3

How to adjust the brilliance of the LCD and keys

1. Press the BRILL key to show the [BRILL] setting window.
BRILL
LCD
Ke
2. To adjust the brilliance, use the cursorpad;  or  for the LCD,  or  for the
keys.
3. Press the ENT or MENU/ESC key to close the setting window.
BRILL TEST
ACK Extract
Short press: Displays the [BRILL] setting window.
Long press: Restores the brilliance of the LCD and keys to
default.
BAM mode: Not used.
Legacy mode: Acknowledge an alert to stop the flashing of
the alert list and silence the alert buzzer.
Opens the test menu.
Extracts the recorded data to the external media.
Short press: Opens/closes the menu, returns one layer in
menu operation.
Long press: When one ore more alerts are active, opens the
alert list. When no active alert exists, returns to the base
screen except in pop-up displays (e.g. key beep, extraction re-
lated, etc.) and tests.
• Confirms a selection.
• Legacy mode only: Silences the alert buzzer temporarily
when there are unacknowledged alerts. (The alert buzzer
sounds again in 30 seconds after the buzzer stops.)
Short press: Selects a menu item, switches the page, adjusts
the brilliance of the LCD and keys when the [BRILL] setting
Cursorpad
window opens.
Long press: Moves the cursor continuously.
◄
Min Max
5
▼
Min Max
y
5
MENU
ESC
ENT
Function
►
▲
Setting ranges: 0 to 7
Defaults: 5
1. OPERATION
1-7