Aligning the needle bar linkage
9
The adjustment requires that the axial movement of pins and shafts run-
ning in plain bearings be restricted correctly ( p. 18).
9.1 Moving the needle bar linkage sideways
Proper setting
When the stitch length is set to 0 and the value set on the handwheel scale
is 90°:
Needle bar (4), sewing foot bar (5) and presser foot bar (6) are all in a
Cover
• Upper covers ( p. 11).
• Front cover ( p. 12).
Service Instructions 967 - 02.0 - 12/2015
Aligning the needle bar linkage
WARNING
Risk of injury!
Crushing injuries from moving parts.
Switch off the machine before aligning the needle
bar linkage.
line.
47