Axial Play For Shafts Running In Plain Bearings - DURKOPP ADLER 967 Instruction Manual

3.5 Axial play for shafts running in plain bearings

Fig. 11: Axial play for shafts running in plain bearings
①
②
③
(1) - Plain bearing shell
(2) - Shaft
Shafts (2) running in plain bearing shells (1) are axially adjusted when the
lever (3) and the adjusting ring (4) touch the front face of the bearing shells
(1).
When adjusting components mounted on shafts running in plain bearings,
always ensure that the axial play of these shafts is as small as possible or
amounts to 0.
18
④
(3) - Lever
(4) - Adjusting ring
Service Instructions 967 - 02.0 - 12/2015
Working basis