Adjusting The Foot Stroke; Adjusting The Foot Stroke Generated By The Hand Lever - DURKOPP ADLER 967 Instruction Manual

Adjusting the foot stroke

12 Adjusting the foot stroke

12.1 Adjusting the foot stroke generated by the hand lever

The hand lever (1) allows the feet to be raised to the height of 14 and 20 mm.
The extent of the two strokes is determined by the dimensions of the elements
of the lift mechanism.
Proper setting
The presser foot rests on the throat plate, and the hand lever (1) is at the
inactive position:
 The lift lever (3) has a guaranteed clearance of 0.3 to 0.5 mm to the
Cover
• Head cover ( p. 12).
Fig. 46: Setting the thrust movement of the feed dog
①
②
(1) - Hand lever
(2) - Screw
(3) - Lift lever
Setting steps
1. Put the handwheel into the 0° position ( p. 20). The presser foot rests
2. Loosen the screw (2) and leave the hex key (5) inserted.
Service Instructions 967 - 02.0 - 12/2015
WARNING
Risk of injury!
Crushing injuries from moving parts.
Switch the machine off before checking and
adjusting the stroke of the feet on the machine.
drive dog (4).
on the throat plate.
(4) - Drive dog
(5) - Hex key
⑤
④
③
65