Lubricating The Needle Bar - DURKOPP ADLER 967 Instruction Manual

Maintenance

16.2 Lubricating the needle bar

For lubricating the machine, use only lubrication oil DA-10 or oil of equiv-
alent quality with the following specifications:
DA-10 can be obtained from DÜRKOPP ADLER AG sales offices using
the following part number:
Container
250 ml
1 l
2 l
5 l
The special grease for lubricating the machine components is provided in
the accessory pack. It can also be obtained from DÜRKOPP ADLER AG
sales offices using the following part number:
Grease Gun (without grease)
Special Grease 50 g
Service Instructions 967 - 02.0 - 12/2015
WARNING
Risk of injuries due to contact with oil!
Contact with oil can cause irritation, rashes, aller-
gies or skin injuries.
ALWAYS avoid long-term contact with oil.
ALWAYS thoroughly wash the affected areas if
contact with oil occurs.
ACHTUNG
Risk of environmental damage from old oil!
Incorrect handling of old oil can result in severe
environmental damage.
ALWAYS observe the legally prescribed
regulations for handling and disposal of mineral oil.
Take care to ensure that oil is NEVER spilled.
• Viscosity at 40° C: 10 mm
• Flash point: 150° C
Part number
9047 000011
9047 000012
9047 000013
9047 000014
2
/s
Part number
9401 000038
9047 098004
87