Moving The Feed Dog; Moving The Feed Dog Carrier - DURKOPP ADLER 967 Instruction Manual

8.1.1 Moving the feed dog

Cover
• Throat plate ( p. 15)
Fig. 27: Moving the feed dog on the feed dog carrier
Setting steps
1. Loosen the screws (3).
2. Move the feed dog (1) on the feed dog carrier (2).
3. Tighten the screws (3).

8.1.2 Moving the feed dog carrier

The feed dog carrier is connected to the stitch regulator gear via the sliding
shaft and can be moved on this shaft.
Cover
• Tilt the machine head ( p. 10)
40
①
②
(1) - Feed dog
(2) - Feed dog carrier
Place the removed throat plate next to it as an aid for orientation
so that the feed dog can be screwed on straight.
Setting the feed dog
(3) - Screws
Service Instructions 967 - 02.0 - 12/2015
③