FS728TP Smart Switch Software Administration Manual
Figure 3-21
The Basic LLDP Configuration screen contains the following fields:
LLDP Properties
•
LLDP – Select the LLDP global status on the device. The possible field values are:
–
Disable – Disables LLDP on the device. This is the default value.
–
Enable – Enables LLDP on the device.
•
LLDPDU Handling – Select LLDPDU (LLDP Data Unit) packet handling when LLDP is
disabled. The possible field values are:
–
Flooding – Indicates LLDPDU packets are flooded to all ports in the system.
–
Filtering – Indicates LLDPDU packets are filtered. This is the default.
•
TLV Advertised Interval – Enter the rate in seconds at which LLDP advertisement
updates are sent. The possible field range is 5 - 32768 seconds. The default value is 30
seconds.
Managing System Settings
v1.1, September 2009
3-39