NETGEAR FS728TP Software Administration Manual page 179

FS728TP Smart Switch Software Administration Manual
Figure 6-6
The Advanced 802.1x Configuration screen contains the following fields:
• Port Based Authentication State – Enable port-based authentication on the device. The
possible field values are:
– Disable – Disables port-based authentication on the device. This is the default value.
– Enable – Enables port-based authentication on the device.
• Authentication Method – Enter the authentication method used for port authentication.
The possible field values are:
– RADIUS, None – Indicates port authentication is first attempted through the RADIUS
server. If the RADIUS server is inaccessible or not defined, then no authentication
method (None) is used and the session is permitted.
– RADIUS – Indicates port authentication is through the RADIUS server.
– None – Indicates no authentication method is used to authenticate the port.
• Guest VLAN – Enter whether the Guest VLAN is enabled on the device. The possible
field values are:
– Disable – Disables Guest VLAN on the device. This is the default value.
6-12
v1.1, September 2009
Managing Security