NETGEAR FS728TP Software Administration Manual page 103

FS728TP Smart Switch Software Administration Manual
3. Click on the gold button. The port panel displays.
4. Select the ports to be members of the LAG.
5. Click APPLY to update the device.
6. Click CURRENT MEMBERS. The Current Members window opens and displays the
member ports included in the LAG:
Figure 4-4
Advanced
The LAG Advanced menu contains the following options:
• "LAG Configuration"
• "LAG Membership"
• "LACP Configuration"
• "LACP Port Configuration"
LAG Configuration
The Advanced LAG Configuration screen contains fields for configuring LAG parameters. The
system supports 8 LAGs, and each LAG can contain up to 8 ports.
To define LAG parameters:
1. Click Switching > LAG > Advanced > LAG Configuration. The Advanced LAG
Configuration screen displays:
4-8
v1.1, September 2009
Configuring Switching Settings