FS728TP Smart Switch Software Administration Manual
Figure 3-4
The SNTP Server Configuration screen contains the following fields:
•
SNTP Server 1 – Enter the primary SNTP server IP address. The Primary SNTP server is
the first server used to retrieve the system time.
•
Delete – Removes the currently configured SNTP Server 1.
•
SNTP Server 2 – Enter the secondary SNTP server IP address
server retrieves the system time if the Primary SNTP server becomes unavailable.
•
Delete – Removes the currently configured SNTP Server 2.
2. Enter the SNTP Server 1 and SNTP Server 2 in the provided fields.
3. Click APPLY to update the system settings.
To remove SNTP servers:
1. Check the Delete box for each SNTP server that is to be removed.
2. Click APPLY to update the system settings.
Managing System Settings
v1.1, September 2009
.
The Secondary SNTP
3-7