NETGEAR FS728TP Software Administration Manual page 172

FS728TP Smart Switch Software Administration Manual
To remove a RADIUS Server entry:
1. Click Security > Management Security > RADIUS. The RADIUS screen displays.
2. Select the RADIUS Server entry.
3. Click DELETE to remove the entry.
Accounting Server Configuration
RADIUS accounting enables recording of device management sessions (web login/logout but
not SNMP) as well as 802.1x authentication sessions.The RADIUS Accounting Server
Configuration screen contains the following fields:
• Accounting Mode – Select the RADIUS accounting method. The possible field values
are:
– None – Indicates RADIUS accounting is disabled. This is the default.
– 802.1x – Indicates 802.1x authentication sessions are recorded.
– Login – Indicates device management (Web login and logout) sessions are recorded.
– Both – Indicates both 802.1x authentication and device management sessions are
recorded.
• Accounting Server Address – Select the RADIUS Accounting Server IP address.
• Accounting Port – Enter the RADIUS Accounting port number. The accounting port is
used to handle RADIUS server accounting. The field default is 1813.
4. Select the RADIUS Accounting Mode from the list in the provided field.
5. Select the RADIUS Accounting Server Address from the list in the provided field.
6. Enter the RADIUS Accounting Port in the provided field.
7. Click APPLY to update the device.
TACACS+
Terminal Access Controller Access Control System (TACACS+) provides centralized security
user access validation. The system supports up-to 2 TACACS+ servers.
TACACS+ provides a centralized user management system, while still retaining consistency with
RADIUS and other authentication processes.
Managing Security
v1.1, September 2009
6-5