NETGEAR FS728TP Software Administration Manual page 169

FS728TP Smart Switch Software Administration Manual
Change Password
The Change Password screen contains parameters for configuring device passwords.
Authentication on this device uses only a password, not a username.
To change the device password:
1.
Click Security > Management Security > User Configuration > Change Password. The
Change Password screen displays:
Figure 6-1
The Change Password screen contains the following fields:
• User Name – Displays the User Name.
• Old Password – Enter the current password for accessing the system.
• New Password – Enter a new password for accessing the system.
• Retype New Password – Repeat the new password used to access the system.
2. Enter the Old Password, New Password and Retype New Password in the provided fields.
3. Click APPLY to update the device.
6-2
v1.1, September 2009
Managing Security