FS728TP Smart Switch Software Administration Manual
Figure 3-18
The SNMPv3 Trap Configuration screen contains the following fields:
•
Recipients IP – Enter the IP address to which the traps are sent.
•
Notification Type – Select the type of notification sent. The possible field values are:
–
Traps – Indicates traps are sent.
–
Informs – Indicates informs are sent.
•
User Name – Enter the user name. The field range is up to 30 alphanumeric characters.
•
Security Level – Select the security level attached to the group. Security levels apply to
SNMPv3 only. The possible field values are:
–
No Authentication – Indicates neither the Authentication nor the Privacy security
levels are assigned to the group.
–
Authentication – Authenticates SNMP messages and ensures that the SNMP
message's origin is authenticated.
–
Privacy – Encrypts SNMP messages.
•
UDP Port – Enter the UDP port used to send notifications. The default is 162.
Managing System Settings
v1.1, September 2009
3-33