NETGEAR FS728TP Software Administration Manual page 123

FS728TP Smart Switch Software Administration Manual
4. If you selected Disable in the Spanning Tree State field, select the BPDU Handling mode
from the list in the provided field.
5. Click APPLY to update the device.
Advanced
The STP Advanced menu contains the following options:
• "STP Configuration"
• "CST Configuration"
• "CST Port Configuration"
• "RSTP"
• "MST Configuration"
• "MST Port Configuration"
STP Configuration
The Advanced STP Configuration screen contains parameters for enabling STP on the device.
To configure STP on the device:
1. Click Switching > STP > Advanced > STP Configuration. The Advanced STP
Configuration screen displays:
4-28
v1.1, September 2009
Configuring Switching Settings