FS728TP Smart Switch Software Administration Manual
Figure 4-24
The Advanced IGMP Snooping Configuration screen contains the following fields:
IGMP Snooping Configuration
•
Status – Select the IGMP Snooping status on the device. IGMP Snooping is operational if
both the Status and Bridge Multicast Filtering fields are enabled. The possible field values
are:
–
Disable – Disables IGMP Snooping on the device. This is the default value.
–
Enable – Enables IGMP Snooping on the device.
•
Bridge Multicast Filtering Status – Select the bridge Multicast filtering status on the
device. The possible field values are:
–
Disables – Disables Multicast filtering on the device. If Multicast filtering is disabled,
Multicast frames are flooded to all ports in the relevant VLAN. Disabled is the default
value.
–
Enables – Enables Multicast filtering on the device.
Interface Settings
•
VLAN ID – Displays the VLAN ID.
4-44
v1.1, September 2009
Configuring Switching Settings