NETGEAR FS728TP Software Administration Manual page 234

GS700TP Smart Switch Software Administration Manual
Figure 8-3
The Upload screen contains the following fields:
• File Type – Enter the type of file to be uploaded. The possible field values are:
– Firmware – Upload the Firmware File.
– Configuration – Upload the Configuration File.
• via TFTP – Select to upload the Firmware or Configuration File to the TFTP Server.
• via HTTP – Select to upload the Configuration File via the web browser interface
(HTTP).
• TFTP Server IP – Enter the TFTP Server IP Address to which the Firmware or
Configuration file is uploaded.
• Remote Filename – Enter the name of the destination file on the TFTP server.
2. Select Firmware or Configuration as the upload File Type from the provided field.
3. Select whether to upload via TFTP or via HTTP. If you selected the Firmware File to upload,
you must select via TFTP.
4. If you selected via TFTP,nter the TFTP Server IP address in the provided field.
8-4
v1.1, September 2009
Maintenance