NETGEAR FS728TP Software Administration Manual page 138

FS728TP Smart Switch Software Administration Manual
– Enable – Enables IGMP Snooping on the VLAN.
– Disable – Disables IGMP Snooping on the VLAN.
2. Select the IGMP Snooping Status in the provided field.
3. Click APPLY to update the device.
To configure IGMP Snooping on a VLAN:
1. Click Switching > Multicast > Basic > IGMP Snooping Configuration. The Basic IGMP
Snooping Configuration screen displays.
2. Select the VLAN ID entry in the Interface Settings table.
3. Select the Status from the list in the provided field in the first row.
4. Click APPLY to update the device.
Advanced
The Multicast Advanced menu contains the following options:
• "IGMP Snooping Configuration"
• "Multicast Group Configuration"
• "Multicast Group Membership"
• "Multicast Forward All"
IGMP Snooping Configuration
To configure Advanced IGMP Snooping:
1. Click Switching > Multicast > Advanced > IGMP Snooping Configuration. The Advanced
IGMP Snooping Configuration screen displays:
Configuring Switching Settings
v1.1, September 2009
4-43