NETGEAR FS728TP Software Administration Manual page 59

FS728TP Smart Switch Software Administration Manual
• View Name – Enter the user-defined view name. The view name can contain a maximum
of 30 alphanumeric characters.
2. Select the entry.
3. Enter the View Name field in the first row.
4. Click APPLY to update the device.
To add a new SNMP View Name:
1. Click System > SNMP > SNMPv3 > View Name. The SNMPv3 View Name screen displays.
2. Enter the View Name field in the first row.
3. Click ADD to update the device.
To remove an SNMP View Name:
1. Click System > SNMP > SNMPv3 > View Name. The SNMPv3 View Name screen displays.
2. Select the entry to be removed.
3. Click DELETE to remove the entry.
View Content
The View Content screen allows the network manager to assign view attributes to views created in
the "View Content" screen. Views provide or block access to device features or portions of
features. For example, a view can be defined to provide a view that SNMP group A has Read Only
(R/O) access to Multicast groups, while SNMP group B has Read-Write (R/W) access to Multicast
groups. Feature access is granted via the MIB name or MIB Object ID.
To define the SNMP View Content:
1. Click System > SNMP > SNMPv3 > View Content. The SNMPv3 View Content screen
displays:
3-22
v1.1, September 2009
Managing System Settings