NETGEAR FS728TP Software Administration Manual page 107

FS728TP Smart Switch Software Administration Manual
Figure 4-7
LACP Configuration
Aggregated links can be set up manually or automatically established by enabling LACP on the
relevant links. Aggregated ports can be linked into link-aggregation port-groups. Each group is
comprised of ports with the same speed. The LACP Configuration screen contains a field for
configuring a global LACP priority value.
To configure LACP:
1. Click Switching > LAG > Advanced > LACP Configuration. The LACP Configuration
screen displays:
4-12
v1.1, September 2009
Configuring Switching Settings