NETGEAR FS728TP Software Administration Manual page 143

FS728TP Smart Switch Software Administration Manual
• Interface Status – Select the interface status. The possible field values are:
– Static – Indicates the interface is joined to the Multicast group statically.
– Forbidden – Indicates the interface is forbidden to join the Multicast group.
– Excluded – Indicates the interface is not included in the Multicast group.
2. Select the VLAN ID from the list in the provided field.
3. Select the Multicast Address from the list in the provided field.
4. Select the interface entry in the Multicast Group table.
5. Select the Interface Status from the list in the provided field in the first row.
6. Click APPLY to update the device.
Multicast Forward All
The Multicast Forward All screen contains fields for attaching ports or LAGs to a device that is
attached to a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast
packets are forwarded only to the appropriate port or VLAN.
To define Multicast forward all settings:
1. Click Switching > Multicast > Advanced > Multicast Forward All. The Multicast Forward
All screen displays:
4-48
v1.1, September 2009
Configuring Switching Settings