ESI ESI2000 Operation Manual page 95

!
Caution: If a converted preset NAME
already exists in the current bank, two
presets may be created with the same name,
even though they might be different.
10. Use the INC/DEC buttons or the Data Entry Control to select
the Program. Press ENTER to load and convert a single program.
"All" allows you to load and convert all programs in the volume.
Selecting "None" allows you to load samples only.
P:A
Program:FullGrand
If "All" is selected, the following screen will appear:
P:A
Program:**all**
Overwrite Bank?
Programs and samples may be loaded into a new bank (Overwrite Bank
= Yes) or merged with the existing bank (No).
11. Press Yes to overwrite the current bank or No to merge the
programs with the existing bank. Loading will begin immediately.
P:A
Program:**none**
If "None" is selected, the following screen will appear:
P:A
Sample: **all**
12. Use the INC/DEC buttons or the Data Entry Control to select
the Sample. Press ENTER to load and convert a single sample.
• "All" allows you to load and convert ALL samples in the
volume.
If "ALL" is selected, the overwrite bank message (as above) will appear,
allowing you to either overwrite the bank or merge the samples with the
current bank.
AKAI LOAD from
Vol:PIANOS
Select Program
AKAI LOAD from
Vol:PIANOS
Y/N
AKAI LOAD from
Vol:PIANOS
Select Program
AKAI LOAD from
Vol:PIANOS
Select Sample
87
Master/Global