ESI ESI2000 Operation Manual page 241

FX B
Parameters
Feedback Amount
The Chorus and Flange effects have a controllable feedback loop after
the delay element. Feeding back a small amount of the signal intensifies
the effect by creating multiple cancellations or images.
1. Press the Preset Definition key. The LED illuminates and the
Preset Definition menu appears.
2. Select Effects (9). The main Effect screen appears.
3. Select Preset Effect B (1). The following screen appears.
PRESET EFFECT B
Effect:
4. Select one of the effects using the Data Entry Control or INC/
DEC keys.
5. Press the Right Cursor key. The Effect Parameters screen appears.
PRESET EFFECT B
Feedback:
LFO Rate:
Delay Time:
6. Move the Cursor down to the second line and adjust the Feed-
back as desired.
7. Press the Preset Definition key to return to the main menu.
LFO Rate
Chorus and Flange effects use a Low Frequency Oscillator (LFO) to
animate the effect. An LFO applied to a chorus effect creates the slight
changes necessary for a realistic choral effect. Applied to a flanger, the
LFO moves the comb filter notches and adds animation to the sound.
1. Press the Preset Definition key. The LED illuminates and the
Preset Definition menu appears.
2. Select Effects (9). The main Effect screen appears.
3. Select Preset Effect B (1). The following screen appears.
PRESET EFFECT B
Effect:
Flange 1
88
3
---
Symphonic
Appendix
233