Rename Preset - ESI ESI2000 Operation Manual

2. Rename
Preset
Tip: Use the data entry knob or the
increment/decrement buttons to access the
entire character set. A five octave keyboard
does not have enough keys to access all the
available characters.
108
ESI Operation Manual
8. If desired, rename the preset. Choose the characters to be changed
with the left and right cursor buttons. Select the desired characters
by using the ten key pad, data entry control and keyboard. You can
also use the up cursor to insert spaces and the down cursor to delete
spaces. (See 2. Rename Preset.)
9. Press ENTER to exit the submodule. The ESI returns to the
Module Identifier.
This submodule allows you to rename any preset in the ESI-32's current
bank.
1. Activate Preset Management module.
2. Select Rename Preset (2).
3. Scroll through the presets available for renaming. When the
display shows the desired preset, press ENTER.
P00 Current Preset
Select a Preset
4. Rename the preset. Choose the characters to be changed with the
left and right cursor buttons. Select the desired characters by using
the ten key pad, data entry control, and keyboard. You can also use
the up cursor to insert spaces and the down cursor to delete spaces.
P00 Untitled Preset
[0-9]/Encoder/Kybd
5. Press ENTER to exit the submodule. The ESI returns to the
Module Identifier.

RENAME PRESET

RENAME PRESET