ESI ESI2000 Operation Manual page 190

182
ESI Operation Manual
VEL SWITCH PT/LINK
Velocity Ranges:
Pri:
Sec:
8. Set the Primary and Secondary Velocity Ranges and press
ENTER. After pressing ENTER, the ESI returns to the Module
Identifier.
9. Press Preset Definition to deactivate the module and return to the
Preset Selection screen.
10. Select the Linked Preset.
11. Press the Preset Definition key.
12. Select submodule Vel Switch Pt/Link (6).
13. Press the Right Cursor key. The following screen appears.
VEL SWITCH PT/LINK
Velocity Ranges:
Pri:
Sec:
14. Set the Velocity Ranges as shown above so that all four layers
now have their own velocity range and press ENTER. After
pressing ENTER, the ESI returns to the Module Identifier.
15. Return to the first preset.
16. Play the Keyboard soft at first, then harder and harder. You
should hear the four different layers play as you vary the velocity.
Other Ideas
• By overlapping the velocity ranges you can create other special
effects like having the Secondary layer come in only when a specific
velocity is reached.
Pri
Velocity
0 16
Sec
• With an effect assigned to a single layer you can use velocity to
switch in effects such as echoes, chorus or reverb.
• Because you can link as many presets as you want, you could assign
each layer to a very small velocity range so that different presets will
be selected in a seemingly random way.
0 to 32
33 to 64
65 to 96
97 to 127
32 48 64 80 96 112 127