Preset Management; Load Preset - ESI ESI2000 Operation Manual

1. Load
Preset
Tip: If you load a preset that uses
samples already present in the bank, new
copies of the samples will not be loaded.
This technique saves a great deal of memory
space. However, the samples must be
identical, even down to the name, otherwise
new samples will be loaded.
A preset, with its samples, can be loaded from the floppy disk, the
internal Zip disk or an external storage device.
1. Activate Preset Management module.
2. Select Submodule Load Preset (1).
3. If you wish to select a different drive, move the cursor to the
drive number. If not, go to step 5.
4. Select the drive containing the preset to be loaded, then press
ENTER.
LOAD PRESET from
D1
5. Select the bank number that contains the preset to be loaded,
then press ENTER.
LOAD PRESET from
D1
B00 Current Bank
6. Select the preset to be loaded, then press ENTER.
LOAD PRESET from
P00 Current Preset
Select Source Preset
7. Select the destination preset number into which the source
preset will be loaded, then press ENTER. If you try to overwrite
an existing preset, you will be asked if you are sure. Enter Yes to
replace the existing sample, or No to cancel the operation.
LOAD PRESET into
P00 Selected Preset
P00 Empty Preset
Select Dest Preset
The Rename Preset screen appears on the display.
Main HD
Select a Drive
Main HD
Select a Bank
107

Preset Management