Using The Effects Channel Settings In Multi Mode - ESI ESI2000 Operation Manual

Tip: You can create special presets
without samples to be used as "Effects
Presets". By assigning these effects presets
to the Multimode Effects Control Channel,
you can use Program Change commands to
switch between effects during a sequence.
224
ESI Operation Manual

Using the Effects Channel Settings in Multi Mode

In Multi Mode, the effects settings can follow the effects settings of the
preset on a special MIDI channel. You designate one MIDI channel as the
"Multimode Effects Control Channel." When this is done, the effects
processors follow the effects setting made in the preset assigned to this
MIDI channel. This powerful feature allows you to change effects during
a sequence simply by changing the preset on the control channel.
Master
3
FX
(Multi mode)
Selected FX Control Channel
To Set the Effects Control Channel:
1. Press the Master/Global key. The LED illuminates and the Master/
Global menu appears.
2. Select Effects (4). The main Effect screen will appear.
3. Select Effects Setup (2). The following screen will appear.
Effects:
Multimode Control:
preset on channel 16
4. Move the Cursor down to the "Multimode Control" field.
Select "preset on channel X."
5. Set the channel to the MIDI channel you want to be the effects
control channel. The Effects settings programmed in the Preset on this
selected channel will be used for ALL the other MIDI channels.
6. Press Enter to save the Master Settings.
Preset
FX
Ch 1
One Channel's
Preset determines
the Effect Settings
Preset
FX
Ch 16
EFFECT SETUP
Enabled