ESI ESI2000 Operation Manual page 2

ii
ESI Operation Manual
6. The ESI should only be connected to a power supply of the type
described in the operating instructions and as marked on the
product.
7. Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure of the ESI through openings.
8. This ESI may be equipped with a polarized line plug (one blade
wider that the other). This is a safety feature. If you are unable to
insert this plug into the outlet, do not defeat the safety purpose of
the plug. Contact an electrician to replace your obsolete outlet.
9. The power supply cord of the ESI should be unplugged from the
outlet when left unused for a long period of time.
10. This product, in combination with an amplifier and headphones and
speakers, may be capable of producing sound levels that could cause
permanent hearing loss. Do not operate for a long period of time at a
high volume level or at a level that is uncomfortable. If you experi-
ence any hearing loss or ringing in the ears, consult an audiologist.
11. The product should be serviced by qualified service personnel when:
A. The power supply cord has been damaged; or
B. Objects have fallen, or liquid has been spilled into the product; or
C. The product has been exposed to rain; or
D. The product has been dropped or the enclosure damaged; or
E. The ESI does not operate normally or exhibits a marked change
in performance.
12. All servicing should be referred to qualified service personnel.
SAVE THESE INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT REMOVE COVER.