NEC UNIVERGE NEAX 2000 IPS Reference Manual page 339

WCS Required Equipment (Cont.)
EQUIPMENT
• 10BASE-T Cable
(TIA/EIA category
3 or larger)
• 100BASE-TX
Cable (TIA/EIA
category 5)
Router
PN-AP00-B (DBM)
PN-IPTB (IPT)
PN-4VCTI (4VCT)
IPTRK BUS CA
• 10BASE-T Cable
(TIA/EIA category
3 or larger)
• 100BASE-TX
Cable (TIA/EIA
category 5)
Router
PN-AP00-B (DBM)
PZ-M606-A (ETHER)
• 10BASE-T Cable
(TIA/EIA category
3 or larger)
• 100BASE-TX
Cable (TIA/EIA
category 5)
Note: The SPN-AP00B DBM-C is required when accommodating 257 or more PSs.
UNIVERGE 2000 IPS Request For Proposal (RFP) Reference Guide
NEAX
Issue 6
DESCRIPTION
10BASE-T/100BASE-TX Cable
between ETHER card and Ethernet
Cable Length:
Maximum 100 m (328 ft.)
Roaming Data Base Module card
IP Trunk card
4-channel CODEC card
Set of 3 BUS Cables between IPT and
4VCT cards
Length: 0.1 m (0.33 ft.)
10BASE-T/100BASE-TX Cable
between IPT card and Ethernet
Cable Length:
Maximum 100 m (328 ft.)
Roaming Data Base Module card
Ethernet Control Card
10BASE-T/100BASE-TX Cable
between ETHER card and Ethernet
Cable length:
Maximum 100 m (328 ft.)
Chapter 16 Wireless System
QTY REMARKS
As required For Q931a Roaming
over IP Trunk
(Virtual IPT) Note
As required
1
1-8 For Q931a Roaming
over IP Trunk
1-32
(Physical IPT)Note
1-32 sets
As required
As required
1
1 For Short Message
Notification (OAI)
1
Page 16-17