NEC UNIVERGE NEAX 2000 IPS Reference Manual page 206

Chapter 10 System Input/Output (I/O) Interfaces
Service Conditions
1. Only one Interface Port can be provided for PMS.
2. The system sends information relating to the following features to the PMS upon request from the
PMS:
Do Not Disturb
Room Cut-off
3. The
U
NIVERGE
90/120 via TCP/IP connection.
4. The AP00-B with MRC-F program is used for Executed task Print out Request for MP Built-in PMS.
Hardware Required for PMS
Description
SPN-CP24-C MP (UA)
SPN-AP00B MRC-C (AP)
SPN-AP00B MRC-F (AP)
PZ-M606-A (ETHER)
RS RVS-4S CA-C
RS NORM-4S CA-A
RS PRT-4S CA-A
PMS Terminal Serial
PMS Terminal over IP
SMDR Terminal
Printer
MODEM
Note: Only one AP00 at a time can be mounted in the system.
Page 10-10
2000 IPS system can support PMS Model-60 via AP00-B or PMS Model
NEAX
Qty
1 per system
1 per system
1 per system
1 per system
1 per SMDR/PMS
1 per SMDR/PMS
1 per Printer
1 per system
1 per system
1 per system
As required
As required
MP
Control card for PMS Note
Executed Task Print Out for MP PMS Note
MP Mounted card One per MP
AP00-VMS, 13.1ft (4.0m)
AP00-MODEM, 13.1ft (4.0m)
AP00 Printer
Model 60 only
Model 90/Model 120
UNIVERGE 2000 IPS Request for Proposal (RFP) Reference Guide
NEAX
Remarks
Issue 6