NEC UNIVERGE NEAX 2000 IPS Reference Manual page 194

Chapter 9 Feature Descriptions
Group Call – 2Way Calling
This feature permits a Dterm PS III, Multiline
Terminal and Single Line Telephone to page a
maximum of fifteen parties simultaneously,
except the group call leader. After one of
paged parties answers, the paging becomes
the 2 Way Calling between the leader and the
first answered party, and paging other parties
stops automatically. The Dterm PS III is
assigned through system data as participants
in the simultaneous paging groups.
When the signal transmission quality
becomes inferior, a Dterm PS III re-originates
a call automatically and seizes another radio
channel, making the WCS handover the call
to another zone transceiver to maintain the
speech quality.
Individual PS Calling
This feature allows the calling party to page
the individual Dterm PS III.
Last Number Redial – PS
This feature enables a Dterm PS III to store
the numbers dialed in the previous five calls
including the last number dialed. The stack
dial numbers are sequentially displayed on
the LCD, allowing the station user to make an
outgoing call by selecting the desired dialed
number from the display.
Multi-Line Operation – PS
Dterm PS III equipped with two line keys, L1
key and L2 key, and different station numbers
can be assigned to each of two lines. The
number assigned to L1 key of the PS is called
My Line and the other number assigned to L2
key is called Sub Line. My Line and Sub Line
of a Dterm PS III can be assigned to appear
on the Flexible Line Keys of a Multiline
Terminal and the Multiline Terminal can share
the Dterm PS III lines.
Page 9- 48
Handover
Dterm PS II user can originate or receive a
call in any place of a network provided by
multiple PBXs which communicate through
JT-Q931-a.
U
NIVERGE NEAX 2000 IPS Wired for Wireless
This feature allows the U
IPS to have the Wireless PBX feature. The
IPS provides several integrated features
adding on the adjunctive configuration.
This feature allows the Multiline Terminal user
to have a Dterm PS III as Sub Station and to
get service with one telephone number. In
case that one user has both a Multiline
Terminal and Dterm PS III, with this feature
used the user is not required to have two
separate telephone numbers.
-When a user is at his desk, a call is
terminated to his Dterm.
-When a user leaves their desk with Dterm PS
III, a call is automatically terminated to the
Dterm PS III.
In this feature, the Multiline Terminal and
Dterm PS III are referred as Main Station and
Sub Station, respectively.
When a Dterm PS III user moves out of the
service area and the electric field strength
becomes weak, this feature notifies the user
with a warning tone and an LCD display
This feature allows a Dterm PS III user to
receive dial tone and dial the desired number
to originate a call.
This feature allows a Dterm PS III user to
confirm the number to be dialed before
originating a call.
UNIVERGE 2000 IPS Request for Proposal (RFP) Reference Guide
NEAX
Multi-Site Roaming
NIVERGE
Number Sharing
Out of Zone Indication
Overlap Dialing
Preset Dialing
2000
NEAX
.
Issue 6