NEC UNIVERGE NEAX 2000 IPS Reference Manual page 24

Chapter 1 Introduction
Item
Attendant Terminal (Dterm ATT Position)
SMDR Interface
PMS Interface
ACD / MIS or OAI Interface
Remote PIM over IP (Number of PIM for Remote
Sites)
DID Dial Conversion
Call Forwarding-Outside Set
Authorization. Code / Forced Account Code /
Remote Access to System(DISA)Code
Message Reminder Set
Name Display / Guest Name Display
Speed Calling-Station (Station Speed Dial) Set
MP built-in SMDR Call Record
Note: System Capacity is for Main site only. For Total System Capacity see IP Remote Network System
Capacity.
Page 1-18
IPS System Capacity (Single MP System cont'd)
PIM1
UNIVERGE
Capacity Per PIM
PIM2 PIM3 PIM4
Max. 8 sets per system
Max. 2 Interface ports (RS232)
Max 1 interface port (IP) per system
Max. 1 Interface port (RS232)
Max 1 interface port (IP) per system
Max. 1 interface port per system
Up to 30 (depending on network)
1000
496
3000
1024
512
10000
1024
2000 IPS Request for Proposal (RFP) Reference Guide
NEAX
Note
PIM5 PIM6 PIM7 PIM8
Issue 6