NEC UNIVERGE NEAX 2000 IPS Reference Manual page 331

Feature Descriptions
Feature
Analog PBX
Interface
Announcement
- PS No Answer
/Announcement
- PS Out of
Zone
Automatic
Release - Out
of Zone Calls
Call Forwarding
- Not Available
CCIS Interface
Calling Name
Display – PS
Calling Number
Display – PS
DTMF Signal
Sender
Group Call -
Automatic
Conference
(6/10-Party)
UNIVERGE 2000 IPS Request For Proposal (RFP) Reference Guide
NEAX
Issue 6
This feature allows the IPS/WCS to be integrated with many types of
PBXs and to activate various PBS services by sending hook flash
signal and DTMF tone.
This feature allows calls to a Dterm PS III, which cannot be paged, in
a predetermined period of time to be routed to the announcement
notifying the calling party that the Dterm PS III cannot answer.
Announcements can be divided between Announcement - PS No
Answer and Announcement - PS Out of Zone depending on the
Dterm PS III condition.
When a Dterm PS III user engaged in a call moves out of the service
area or enters a radio zone where all the channels are busy and the
communication becomes unavailable, the call will be disconnected
automatically, and the other party receives reorder tone.
When a PS is power off or out of zone, a call directed to the PS is
forwarded to a VMS, and a voice mail message can be recorded to
the VMS and checked from the PS. Also the VMS can page the PS
automatically after the voice mail message is recorded.
This feature allows the IPS/WCS to be integrated with NEC PBXs
with CCIS interface.
Without answering incoming calls or hold calls terminates to the
Dterm PS III, the calling party's name can be confirmed by the
indications on the LCD.
This feature provides a display on the LCD of a Dterm PS III
receiving a call, indicating the station number.
This feature allows a Dterm PS III user to send the DTMF signal
(tone) to the called party (terminal, voice mail system, etc.) while
engaged in communication.
This feature permits a Dterm PS III user, Dterm user or Single Line
Telephone user within the system to establish a conference among
as many as six or ten parties. From a Dterm PS III/Dterm /Single Line
Telephone, a maximum of 9 PSs can be paged simultaneously
except the conference leader. The PSs are assigned to the
simultaneous paging groups as a participant by the system data
beforehand.
Description
Chapter 16 Wireless System
Page 16-9