NEC UNIVERGE NEAX 2000 IPS Reference Manual page 199

MP built-in SMDR on IP
ITEM
Physical Layer
Connection Layer
TCP/IP Protocol
Socket Interface
Transport Protocol
Application Port Number
Number of Connections
Client/Server
Transmission Code
Quasi-normal Restriction Condition
Note 1: The MP card in main site communicates with the SMDR terminal. Therefore, in the communication
settings at SMDR terminal side, set the IP address to connected to the address specified by office data
(CM0B Y=00>00 or CM0B Y=02>03), and application port number shown in the above table.
Note 2: One message is sent each time a request is received from SMDR terminal.
Combinations between SMDR and SMDR Output Format
SMDR
SMDR with AP00
(PN-AP00-B with MRC-C program)
SMDR with AP00
(PN-AP00-B with MRC-F program
MP built-in SMDR on RS-232C
MP built-in SMDR on IP
X: Available —: Not available
Combinations available at the same time
SMDR
SMDR with AP00
(PN-AP00-B with MRC-C program)
SMDR with AP00
(PN-AP00-B with MRC-F program
MP built-in SMDR on RS-232C
MP built-in SMDR on IP
X: Available —: Not available
UNIVERGE 2000 IPS Request for Proposal (RFP) Reference Guide
NEAX
Issue 6
The Ethernet packet format complies with the DIX standard
Complies with 4.3 BSD socket interface
2400 IMS
Format
X
X
)
X
X
Pattern A Pattern B
—
—
)
X
—
Chapter 10 System Input/Output (I/O) Interfaces
Specifications
Ethernet
ARP, IP, ICMP, UDP, TCP
TCP stream type protocol
60010 (fixed)
1
Client: SMDR terminal
Server: PBX
7-bit ASCII code
1. When connection is closed
2. Status monitoring text
Extended
2400 IMS
Format
—
X
X
X
Pattern C
— —
X —
X —
— X
1400 IMS
Format
X
—
—
—
Pattern D Pattern E
— X
X —
— —
X —
Page 10-3